Printing Cannot Be Performed (Via The Print Server) - Canon i-SENSYS LBP6670dn User Manual

Printing Cannot Be Performed (via the Print Server)

If you cannot print when the printer is used via the print server, check the problem following the questions below.
NOTE
For Macintosh users
This section describes the procedure for Windows as an example.
For details on the procedure for Macintosh, see "Driver Guide."
For details on the procedure for displaying "Driver Guide", see
<Question 1> Is the printer turned ON?
Check if the Main Power indicator on the control panel is turned on.
ON
OFF
Cannot be turned ON
<Question 2> Check the indicators on the printer unit.
The (Ready) indicator is on.
The (Ready) indicator is blinking.
The (Message) indicator is on.
The (Job) indicator is on.
The (Job) indicator is blinking.
The Paper Source indicator is blinking.
Downloaded from ManualsPrinter.com Manuals
To <Question 2>
Turn the printer ON.
"You Cannot Turn the Printer ON"
To <Question 3>
The printer is warming up. Please wait a moment.
"The Message Indicator Is On"
The printer is operating. Please wait a moment.
If the printer does not perform printing for a while, perform the print
data output or soft reset.
"Canceling a Job"
Load paper.
"Paper Loading and Output"
"Viewing the Driver Guide."
04L9-0JE