Ftp Client (Macintosh) - Canon i-SENSYS LBP6670dn User Manual

FTP Client (Macintosh)

This section describes the procedure for when Terminal supplied with Mac OS X as standard is used.
IMPORTANT
If the [FTP Settings] check box is not selected in the [TCP/IP Settings] page in [Settings/Registration] - [Preferences] -
[Network], settings cannot be specified from the FTP client.
"Configuring the Protocol Settings"
1
Enter "ftp the IP address of the printer", and then press the [return] key on your keyboard.
Input Example: "ftp 192.168.0.215"
If you are not sure about the IP address of the printer
Print and confirm Network Status Print while referring to
administrator.
2
Enter "root" as the user name, and then press the [return] key on your keyboard.
3
Enter the administrator password, and then press the [return] key on your keyboard.
The default password is "7654321".
4
Enter "cd config", and then press the [return] key on your keyboard.
5
Enter "get CONFIG <the file name>", and then press [return] on your keyboard.
Enter "CONFIG" as all upper case characters.
The config file is downloaded.
The characters entered for <the file name> become the name of the downloaded config file.
NOTE
If the config file cannot be found
Search for the config file using the file search function of your operating system.
(The download directory for the config file varies depending on the operating system or settings.)
6
Downloaded from ManualsPrinter.com Manuals
"Checking the Printer Settings", or consult your network
04L9-09K