Canon i-SENSYS LBP6670dn User Manual page 573

*
[Proxy Settings]
[SNTP]
[Discovery
Response]
[IPSec]
[NetWare Settings]
[AppleTalk]
*
[SMB]
[SNMP Settings]
[SNMP v. 1 Settings]
[SNMP v. 1]
[Dctd.
Community Set.]
Downloaded from ManualsPrinter.com Manuals
*
[Same Domain] : [Use
Proxy], [Do Not Use
Proxy]
*
[Proxy Authentication] :
[Off], [On]
*
[User Name] : -
*
[Password] : -
[Off], [On]
[Off], [On]
[Off], [On]
[NetWare]: [Off],
[On]
*
[Frame Type] :
[Auto Detect],
[Ethernet II],
[Ethernet 802.2],
[Ethernet 802.3],
[Ethernet SNAP]
*
[Print Service] :
[Bindery PServer],
[RPrinter], [NDS
PServer],
[NPrinter]
[Off], [On]
[SMB Server]: [Off],
[On]
[SMB Print]: [Off],
[On]
[Off], [On]
[Dctd. Community
1]:
[Off],
[Read/Write],
[Read Only]
[Dctd. Community
2]:
If you want to use the proxy function also for the same domain,
specify [Use Proxy].
If you want to use the proxy authentication function, specify [On].
Enter the user name to be used for the proxy authentication. Up to
24 alphanumeric characters can be entered.
Enter the password to be used for the proxy authentication. Up to
24 alphanumeric characters can be entered.
When obtaining time using the SNTP Client function, specify [On].
*
Specify the settings for [NTP Server Name] and [Polling
Interval] from the Remote UI.
"Configuring the Protocol Settings"
If you want to set the printer so that it responds to searches that
used the multicast discovery function, specify [On].
*
Specify the setting for [Scope Name] from the Remote UI.
"Configuring the Protocol Settings"
When using the IPSec function, set it to [On].
"Setting the IPSec Encryption Communication Function
(LBP6680x Only)"
Configures the NetWare network settings.
"Configuring the Protocol Settings"
Specifies whether the printer should use AppleTalk.
"Configuring the Protocol Settings"
Specifies whether the printer should use SMB.
"Network Settings for the Printer (SMB) (LBP6680x Only)"
Specify the settings related to SNMP protocol.
"Restricting the Users Who Can Monitor/Change the Settings
Using the SNMP Protocol"
Specify the settings related to SNMP v. 1 protocol.
Specify whether to use the SNMP v. 1 protocol.
[Dctd. Community 1]
Specifies access privileges for the Management Information
Base (MIB) of the community (canon_admin) that SNMP
manages.
[Dctd. Community 2]
Specifies access privileges for the Management Information