Canon i-SENSYS LBP6670dn User Manual page 320

Error Code
407
408
412
420
421
422
423
424
430
431
432
433
Downloaded from ManualsPrinter.com Manuals
Cause
The connection to the POP server was
disconnected.
Could not receive data of 1 Kbyte (1024 byte) for 10 minutes while receiving e-mails.
The response <ERR> was returned
from the POP server.
Could not receive data of 1 Kbyte
(1024 byte) for 10 minutes while
receiving e-mails.
The size of the e-mail data exceeded
1.5 GB.
The size of the e-mail text exceeded
25 MB.
The size of the attached files
exceeded 100 MB.
An attached file in an unsupported
format was sent.
The number of the attached files
exceeded 3.
An e-mail in which [From] is blank was
sent.
Received a divided mail.
An e-mail which included unsupported
encoding or character encoding was
sent.
Received a mail of an unsupported
type (message type).
Received an unsupported multipart
mail.
Invalid data was sent.
An e-mail in HTML format was sent.
Remedy
Consult your network administrator.
If errors occur many times on the same e-mail
data, check if the e-mail data is normal.
Consult your network administrator.
Consult your network administrator.
If errors occur many times on the same e-mail
data, check if the e-mail data is normal.
Reduce the size of the e-mail data to 1.5 GB or
less.
Reduce the amount of the e-mail text.
Reduce the size of the attached files to 100 MB or
less.
Change the format of the attached file into TIFF or
JPEG.
Reduce the number of the attached files to 3 or less.
Enter a name in [From].
Apply the following remedies to send the e-mail so
that it is not divided.
Reducing the size of the e-mail to be sent
(Reducing it to the size which cannot be
divided).
Specifying the application settings so that the
e-mail is sent without being divided.
Change the encoding or character encoding into that
supported by this printer.
"Receiving E-mail Data on the Mail Server and
Printing (E-mail Print)"
Change the content type into any one of the
following types that are supported by this printer.
text/plain
image/jpeg
image/tiff
image/tiff-fx
application/octet-stream
Change the content type of the multipart mail into
any one of the following types that are supported by
this printer.
multipart/mixed
multipart/parallel
multipart/alternative
If the mail is nested, the mail is supported only when
"multipart/alternative" is nested in "multipart/mixed."
Check if the sent e-mail data is normal.
This printer does not support e-mails in HTML
format.