Canon i-SENSYS LBP6670dn User Manual page 273

Conversion]
9
Specify the settings for [Print Settings] as the following, as needed.
[Copies]
[Paper Size]
[Paper Type]
[Manual Feed]
[Enlarge/Reduce to
Fit Paper Size]
[Enlarge Print Area]
[Print 2-Sided]
[Binding Location]
Downloaded from ManualsPrinter.com Manuals
[NTSC]: It calculates the grayscale value using the NTSC standard color conversion
method.
[Uniform It takes the average value of the Red, Green and Blue color values as the
RGB]: grayscale value.
Specify the number of copies to be printed.
Specify the size of paper to print.
If data is input that is outside the engine's maximum and minimum paper size range when the
paper size is automatic, it is printed on the paper size that is set with [Standard Paper Size].
[Auto]: It selects the most suitable paper source for the PDF file page size, and prints.
Other It prints so that the long side of the page size of the PDF file and the long side
than of the selected paper size go in the same direction.
[Auto]:
Specify the type of paper to print.
You can fix the paper source in the multi-purpose tray.
If the check box is selected, it fixes the aspect ratio and scales it to fit with the effective print
area of the paper size that is set and prints. However if [Paper Size] is set as [Auto], this item
cannot be set.
Specify whether to expand the printable area and print.
Depending on the document to be printed, part of the edges of the paper may not be
printed.
Specify 1-sided or 2-sided printing.
Set the binding position on the long side of the paper (long-edged binding) or the short side of
the paper (short-edged binding). If binding is set from the printer side, the position of the
"gutter" is automatically adjusted on the front and back sides of the paper.