Canon i-SENSYS LBP6670dn User Manual page 848

In particular, make sure that the zone in which the printer exists is configured properly in [Zone].
Set
Not set
<Question 18> Check the following points.
The printer destination is set properly.
AppleTalk is available.
For details on the procedure for setting the printer destination, see "Driver Guide."
For details on the procedure for displaying "Driver Guide", see
Set
Not set
<Question 19> Connect the printer and computer directly with the cross-type
*
This is a LAN cable which is used to connect a printer and computer directly without a hub (LAN network).
If printing does not work or if you cannot prepare a cross-type LAN cable, proceed to <Question 20>.
<Question 20> Install the printer driver again.
For details on the procedure for installing the printer driver, see "Printer Driver Installation Guide."
For details on the procedure for viewing "Printer Driver Installation Guide", see "Installation."
<Question 21> Can you print from another computer (LAN connection)?
Printable
Not printable
Downloaded from ManualsPrinter.com Manuals
To <Question 18>
Set AppleTalk properly.
To <Question 19>
Set them properly.
If printing does not work, proceed to <Question 21>.
Make resident software invalid including security software.
Contact your local authorized Canon dealer.
"Viewing the Driver Guide."
*
LAN cable.