Canon i-SENSYS LBP6670dn User Manual page 892

<Cause 1> An incorrect password was entered to print the PDF data.
Solution Enter the correct password.
<Cause 2> The PDF data security settings do not permit printing.
Solution Change the settings to permit printing.
Cannot feed paper.
<Cause> Paper of the size or type that cannot be fed from the multi-purpose tray or paper drawer is
specified.
If a paper source is specified, press [
Solution 1
"[Select Feeder] Menu"
Press [
Solution 2
Load paper appropriate for the paper source.
Solution 3
"Usable Paper"
Specify the following items.
[Standard Paper Size]
Solution 4
[Default Paper Type]
"[Setup] Menu ([Paper Source] Options)"
Press [
Solution 5
result in deterioration in print quality.
Cannot perform 2-Sided Printing. <Auto Error Skip>
<Cause> The printer received 2-sided printing data of paper sizes (including the orientation) or paper
types unavailable for automatic 2-sided printing.
Press [
Solution 1
Perform the following procedure.
1. Perform a soft reset.
Solution 2
2. Change the setting to a paper size or type available for automatic 2-sided printing, and then print
again.
Cannot print with the specified resolution. <Auto Error Skip>
<Cause> The printer cannot process the data because it is too complicated.
Press [
Solution 1
being lowered.
Perform the following procedure.
1. Perform a soft reset.
Solution 2
Downloaded from ManualsPrinter.com Manuals
] ( : Feeder Selection) to select another paper source.
] ( : Online), and then print from the currently selected paper source. However, this may
] ( : Online) to continue printing. However, the data on each side is printed on two pages.
"Canceling the Process Currently Being Performed (Soft Reset)"
] ( : Online) to continue printing. In this case, the printer prints with the image quality level
"Canceling the Process Currently Being Performed (Soft Reset)"
] ( : Feeder Selection), and then set [Paper Source] to [Auto].