Canon i-SENSYS LBP6670dn User Manual page 470

Click [Close].
9
Click [Apply].
If you want to use LPD, proceed to Step 10.
If you want to use RAW, proceed to Step 11.
10
If you want to use LPD, change the port configuration information.
When using LPD printing, set up the LPR protocol using the procedure below.
(1) Click [Configure Port].
(2) Select [LPR].
(3) Enter "lp" in [Queue Name].
(4) Click [OK].
Downloaded from ManualsPrinter.com Manuals