Canon i-SENSYS LBP6670dn User Manual page 405

(SNMP_V1_ENB)
[Use Community Name 1]
(SNMP_COMMUNITY1_ENB)
[Community Name 1]
(SNMP_COMMUNITY1_NAME)
[MIB Access Permission]
(SNMP_COMMUNITY1_ACCESS)
[Use Community Name 2]
(SNMP_COMMUNITY2_ENB)
[Community Name 2]
(SNMP_COMMUNITY2_NAME)
[MIB Access Permission]
(SNMP_COMMUNITY2_ACCESS)
[Use SNMPv3]
(SNMP_V3_ENB)
[Obtain Printer Management
Information from Host]
(SNMP_GET_PRT_MNG_INFO)
[Reject SNMP Packets While in
Sleep Mode]
User Settings (SNMPv3)
: Can be specified
Option
[User Name]
[MIB Access
Permission]
[Security Settings]
[Authentication
Algorithm]
[Authentication
*
Password]
[Encryption
Algorithm]
[Encryption
*
Password]
*
Can be specified only when the printer is in the state of SSL encrypted communication. (If the printer is not in the
state of encrypted communication, specify the setting using the printer's control panel.)
Context Settings (SNMPv3)
: Can be specified
Downloaded from ManualsPrinter.com Manuals
ON, OFF
ON, OFF
Up to 32
characters
RW, RO
([Read/Write],
[Read Only])
ON, OFF
Up to 32
characters
RW, RO
([Read/Write],
[Read Only])
ON, OFF
ON, OFF
ON, OFF
: Cannot be specified
Contents
Up to 32 alphanumeric characters
[Read/Write], [Read Only]
[Authentication Yes/Encryption Yes],
[Authentication Yes/Encryption No],
[Authentication No/Encryption No]
[MD5], [SHA1]
6 to 16 alphanumeric characters
[DES], [AES]
6 to 16 alphanumeric characters
: Cannot be specified
ON
ON
public
RO
([Read
Only])
OFF
public2
RO
([Read
Only])
OFF
OFF
OFF
Default
initial
[Read/Write]
[Authentication
Yes/Encryption
Yes]
[MD5]
initial
[DES]
initial
Settings Settings
Settings
Using
Using
NetSpot
FTP
Device
Client
Installer
Using
the
Control
Panel