Blank Paper Is Output (Nothing Is Printed On The Paper) - Canon i-SENSYS LBP6670dn User Manual

Blank Paper Is Output (Nothing Is Printed on the Paper)

Perform one of the following solutions according to the cause.
<Cause 1> The toner cartridge was installed with the sealing tape still attached.
Take the toner cartridge out of the printer, pull out the sealing tape, and reinstall the toner cartridge.
Solution
"Toner Cartridge Replacement"
<Cause 2> Multiple sheets of paper are fed at a time.
Fan the paper thoroughly, and then align the edges of the stack properly on a hard, flat surface.
Solution
<Cause 3> The size of the paper loaded in a paper source is different from the following
settings.
Setting for [Output Size] in the [Page Setup] sheet in the printer driver
[MP Tray Paper Size], [Drawer 1 Size], or [Drawer 2 Size] in the [Select Feeder] menu
When the message <Check Paper Size> appears in the display, perform the described solutions in
Solution
Message Appears in the Control
Downloaded from ManualsPrinter.com Manuals
Panel."
04L9-0LR
"A