Canon i-SENSYS LBP6670dn User Manual page 895

Solution Load the paper in portrait orientation, and then print again.
<Cause 4> [Check Paper Size] in the common [Setup] menu ([User Maintenance] options) is set to [On].
Set [Check Paper Size] to [Off], and then print again.
Solution
"[Setup] Menu ([User Maintenance] Options)"
Close XXXX cover. (XXXX shows the cover name)
<Cause> A cover is open.
Close the cover firmly. If the printer is not online, press [
Solution
IEEE802.1X error. Set the necessary auth. information.
<Cause> There is information missing from the IEEE802.1X authentication settings.
Check the IEEE802.1X settings, and reconfigure them.
Solution
"Setting IEEE802.1X Authentication"
Image browse data error.
<Cause> Data which this printer cannot process is included in TIFF data.
Perform the following procedure.
1. Install the SD card.
Solution 1
(LBP6680x
2. 2Q WKH FRQWURO SDQHO VHOHFW >,PDJLQJ@
only)
3. Restart the printer.
This printer cannot print the data. Press [
Solution 2
Image data error.
<Cause> Data which this printer cannot process is included in TIFF data or JPEG data.
This printer cannot print the data. Press [
Solution
Insert toner cartridge.
<Cause> The toner cartridge is not installed or installed improperly.
Install the toner cartridge properly.
Solution
"Toner Cartridge Replacement"
Key management file is corrupt or deleted.
<Cause> The file related to key management is broken.
Downloaded from ManualsPrinter.com Manuals
Installing SD Card
[Setup] Menu ([Imaging] Options)
] ( : Online).
>3ULQW *XDUDQWHH@ >2Q@
] ( : Online) to cancel the job.
] ( : Online) to cancel the job.