Canon i-SENSYS LBP6670dn User Manual page 896

Perform the following procedure.
1. 6HOHFW >1HWZRUN@
[SSL] is set to [Off].
2. Restart the printer, and then regenerate the key and certificate and specify the settings for SSL
Solution
from the Remote UI.
3. Restart the printer.
Load paper.
<Cause> Paper of the size specified in the application is not loaded in the paper source (in all the
paper sources when [Paper Source] is set to [Auto] and in the specified paper source when the setting
is fixed).
Solution 1 Refill or load paper.
Press [
Solution 2
paper size.
"[Select Feeder] Menu"
Not enough download memory. <Auto Error Skip>
<Cause> The memory for registering overlay forms and custom characters ran out and overflowed.
Press [
Solution 1
Perform the following procedure.
1. Perform a soft reset.
Solution 2
2. After the soft reset, either perform a hard reset or turn the printer back ON, increase memory
capacity and print again. (All data in the memory will be erased.)
Not enough memory for PDF processing.
<Cause> There is not enough memory to process a PDF file.
Perform the following procedure.
1. Perform a soft reset.
Solution 2. Decrease the size of the PDF file or divide it into multiple files, and then print again.
The PDF data may be printed properly by opening it from an application and using the printer
driver.
Not enough memory for XPS processing. <Auto Error Skip>
<Cause> There is not enough memory for XPS processing.
Press [
Solution 1
Downloaded from ManualsPrinter.com Manuals
>5HPRWH 8, 6HWWLQJV@
"Security Settings"
] ( : Feeder Selection), and then select other paper source for the same paper size or larger
] ( : Online) to continue printing. However, the overflowed data cannot be registered.
"Canceling the Process Currently Being Performed (Soft Reset)"
"Canceling All the Jobs (Hard Reset)"
"Canceling the Process Currently Being Performed (Soft Reset)"
] ( : Online), and continue printing. However, the data that generated the error will not be
>66/@ XVLQJ WKH FRQWURO SDQHO WKHQ PDNH VXUH WKDW