Canon i-SENSYS LBP6670dn User Manual page 900

"Registering the Paper Size"
<Cause 3> Improper paper source is selected.
Specify the setting for [Paper Source] in the [Select Feeder] menu properly.
"[Select Feeder] Menu"
Solution
When the message <Set below paper.> appears
If the front cover is opened, the message may disappear. However, be sure to follow the directions
in the displayed message to change the paper.
Set cleaning paper and press the Online key. <Auto Error Skip>
<Cause> The printer is waiting to print cleaning paper.
Load Letter size or A4 paper in the multi-purpose tray, and then press [
Solution
Syntax error.
<Cause> Invalid data is sent when printing using the UFR II printer driver.
Press [
Solution 1
is occurring and its subsequent pages are not printed.
Solution 2 Confirm the data to be printed, and then print again.
XPS document data error. <Auto Error Skip> (LBP6680x only)
<Cause 1> The XPS data or the data extracted from the XPS data are invalid.
Solution Check to make sure that the data that was input is normal, restart it and print again.
<Cause 2> A high volume file was sent directly.
Press [
size of the XPS file), and then print again.
Solution 1
Optimizing the XPS file
Dividing the XPS file into multiple files
Send the file again using one of the following methods.
Insert the SD card into the slot and send the file again.
Solution 2 Send the file directly from the USB memory device.
"Installing SD Card (LBP6680x Only)"
"Printing Files Directly from USB Memory Devices (USB Direct Print) (LBP6680x Only)"
XPS font data error. <Auto Error Skip>
<Cause> Incorrect font data was received.
Solution Check the output result for missing text, and correct the data.
Downloaded from ManualsPrinter.com Manuals
IMPORTANT
] ( : Online) to continue printing from the next data. However, the page with which an error
] ( : Online) to cancel the job. Afterward, perform the following processes (decreasing the
] ( : Online).