Adjusting The Printing Position For Each Paper Source - Canon i-SENSYS LBP6670dn User Manual

Adjusting the Printing Position for Each Paper Source

If the printing position is skewed when printing from a certain paper source, you can adjust the position from the control
panel.
IMPORTANT
Confirm the adjustment result.
If any part of the print image lies outside the printable area after adjusting the printing position, the part will be missing in
the print result.
NOTE
Be careful of the orientation for 2-sided printing
The orientation of the images on the reverse pages varies depending on the printing orientation or setting for [Binding
Location].
Checking the Printing Position
Perform the Printing Position Adjustment Print and check the position and direction to be adjusted.
IMPORTANT
Adjusting the printing position for 2-sided printing
Set [2-Sided Printing] to [On] in advance.
1
Press [ ] ( : Feeder Selection).
2
Select [Paper Source] using [
3
Select the paper source that you want to check the printing position using [
press [OK].
When adjusting the printing position for 2-sided printing, select the desired paper source.
[Drawer 2] is displayed only when the optional paper feeder(s) is (are) installed.
Downloaded from ManualsPrinter.com Manuals
] and [ ], and then press [OK].
04L9-01J
] and [ ], and then