Table of Contents
Advertisement
52
Chapter 4 Time-saving features
2
Enter the appropriate two-digit speed dial code.
System Speed Dial codes
System Speed Dial codes are numbered from 01 to 70. The installer assigns numbers to System
Speed Dial codes for the all the system.
Note: There is no difference between using User Speed Dial and using System
Speed Dial. Only the programming is different.
Personal Speed Dial
To add or change a Personal Speed Dial number on your telephone:
Press ≤•›.
1
2
Enter a two-digit code from 71 to 94 that you want to relate with a telephone number.
3
To include a line selection for this number, press the line or intercom button. To select a line
pool, press a programmed line pool button, or press an intercom button and enter a line pool
access code. For the T7100 telephone, you can only select a line pool.
4
Enter the number you want to program.
Press ≥ or
5
01:9___
CANCL
BKSP
Enter digits
QUIT
Invalid code
No number stored
Program and HOLD
Program and OK
QUIT
P0937240 02
OK
.
Continue entering the number you want to program. You can
change the number by pressing
OK
are finished, press ≥ or
Enter the telephone number you want to program exactly as if
you were dialing it normally. When you are finished, press ≥
OK
OK
or
.
You have entered a code outside the code range (01-70 for
system, 71-94 for personal).
There is no number stored on the speed dial code you have
dialed.
If you want to program a line or line pool selection for this speed
dial number, select the line or line pool. If not, enter the
telephone number exactly as if you were dialing it normally.
When you are finished, press ≥.
If you want to program a line or line pool selection for this speed
dial number, select the line or line pool. If not, enter the
OK
telephone number you want to program exactly as if you were
dialing it normally. When you are finished, press
or √. When you
BKSP
OK
.
OK
.
Advertisement
Table of Contents
