Searching For A Contact In The Phone Book - RADVision Scopia XT4000 Series User Manual

Note
Step 5

Searching for a Contact in the Phone Book

You can search by first or last name, or you can display all contacts. This can be done from
the endpoint itself or from the Scopia XT Series web interface.
Procedure
Step 1
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
You can also manually define the Type, Call Type, and Rate each time you place a
call, as described in
Table 3-4 Entering advanced information for a contact
Field Name
Label
Number
Type
Call Type
Rate
From the web interface only, select Save.
Access the Contact list as follows:
•
From the endpoint's main menu, select Contacts.
•
From the XT Series web interface, select Make your call > Basic Options > Contacts.
"Modifying the Default Call Settings" on page
Description
Define the contact's label to provide a short description of
the contact, for example: home, office or virtual room.
Enter the number or alias, to be dialed when contacting
this endpoint.
If necessary, select the protocol to use when calling this
personal endpoint or meeting room:
•
H.323: Select for H.323 endpoints, such as other XT
Series endpoints, or when joining a videoconference
hosted by a Scopia Elite MCU.
•
SIP: Select for SIP endpoints, such as when calling
Microsoft Lync clients.
•
ISDN: If enabled, select to call ISDN endpoints.
Select whether the call is Audio-Video or Audio-Only.
Select the default call rate to be used when calling this
contact. Otherwise, the maximum available bandwidth is
used.
31.
Making Point-to-Point Video Calls | 37