Deleting A Pvc - Nortel Passport 8672ATME Using Manual

Chapter 4 Managing the Passport 8672ATME Module with Device Manager
5
In the Vpi field, type the VPI-bit size.
6
In the Vci field, type the VCI-bit size.
Note: For <vpi.vci>, 0.0 is not supported.
7 In the Name field, type the name of the ATM PVC.
8
In the Encapsulation field, select the encapsulation method (null or IIcSnap).
9
In the Service Type field, select the service type (ubr or vbr).
10 If you select vbr in the Service Type field:
a
In the PeakCellRate field, enter the PCR (an integer between 86 and
733490).
b In the SustainedCellRate field, enter the SCR (an integer between 86 and
733490).
c
In the MaxBurstSize, type the maximum burst size (an integer between 2
and 255).
11 Click Insert.
The Insert ATM PVC dialog box closes.
12 Click Close.

Deleting a PVC

To delete a PVC:
1
On the device view, highlight a port.
2
From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed
3 Click the ATM PVC tab.
4
The ATM PVC tab opens.
5
Click a PvcId entry in the table for the PVC you want to delete.
(Figure
Using the Passport 8672ATME Module
63
12).