Installing The Passport 8672Atme Module; Figure 5 Removing The Filler Panel; Figure 6 Extending The Inserter/Extractor Levers - Nortel Passport 8672ATME Using Manual

Installing the Passport 8672ATME Module

To install the Passport 8672ATME Module:
1
Remove the filler panel from the module slot in the Passport 8600 series
chassis

Figure 5 Removing the filler panel

2 Make sure the inserter/extractor levers are extended away from the
Passport 8672ATME Module front panel

Figure 6 Extending the inserter/extractor levers

.
Chapter 3 Installing the Passport 8672ATME Module
(Figure 5).
Note: Always handle an I/O module by the sides and carefully slide it
out of the chassis. Place the module on a grounded work surface and in
an antistatic bag for storage.
(Figure 6).
9059FA
Using the Passport 8672ATME Module
39
9058FB