Show Ports Stats Atm Lineinterval; Figure 41 Show Ports Stats Atm Lineinterval Command Output - Nortel Passport 8672ATME Using Manual

Table 32 Information fields for the show ports stats atm linecurrent
command (continued)
Field
SEVERELY ERRORED
COUNT (SES)
CODE VIOLATION COUNT
(CV-P)
UNAVAILABLE SECONDS
(UAS)
STATUS

show ports stats atm lineinterval

This command displays statistics
interval. You can specify any interval or span of intervals. The command uses the
syntax:
show ports stats atm lineinterval < intervalid > [< ports >]

Figure 41 show ports stats atm lineinterval command output

Passport-8610:5/show/ports# stats atm lineinterval 96
===========================================================================
===========================================================================
PORT ERRORED SECONDS
NUM COUNT (ES)
---------------------------------------------------------------------------
3/1 0
3/5 0
9/1 0
9/2 0
9/3 0
9/4 0
9/5 0
9/6 0
9/7 0
9/8 0
INTERVAL ID = 96
Passport-8610:5/show/ports#
Chapter 5 Managing the Passport 8672ATME Module with the CLI
Description
Severely Errored Second (SES) is a second with x or more
CVs, or one or more incoming defects.
Coding Violations (CV) are Bit Interleaved Parity (BIP)
errors that are detected in the incoming signal. CV
counters are incremented for each BIP error detected.
Number of seconds that the interface is unavailable.
Status of defects.
ATM Line Interval Stats
SEVERELY ERRORED
COUNT (SES)
0
0
0
0
0
0
0
0
0
0
(Figure 41) for the line over a 15-minute
CODE VIOLATION
COUNT (CV-L)
0
0
0
0
0
0
0
0
0
0
Using the Passport 8672ATME Module
UNAVAILABLE
SECONDS (UAS)
990
990
0
0
0
0
0
0
0
0
103