140
Chapter 6 Configuring the Passport 8672ATME Module
Figure 62 IPX VLAN, Insert dialog box
Table 50
Table 50
Field
NetAddr
Encap
5
In the NetAddr field, configure the IPX network numbers for the VLAN.
6
In the Encap field, click the encapsulation type.
7
Click Insert.
The IPX VLAN, Insert dialog box closes, and the IPX tab is redisplayed.
8
Click Close.
Enabling IPX forwarding
To enable IPX forwarding on both VLANs:
1
From the Device Manager menu bar, choose IPX Routing > IPX.
The IPX dialog box opens with the Globals tab displayed
Figure 63 Globals tab
209195-B
describes the IPX VLAN, Insert dialog box fields.
IPX VLAN, Insert dialog box fields
Description
The IP address of this VLAN.
Encapsulation type: ethernetii, snap, llc, or raw.
(Figure
63).