Show Ports Info Atm Pvc Command - Nortel Passport 8672ATME Using Manual

Chapter 5 Managing the Passport 8672ATME Module with the CLI
Table 24 Information fields for the show ports info atm ports
command (continued)
Field
MAX-BITS VCI
CLOCK SOURCE
LOOPBACK MODE
ADMIN STATE
STATUS

show ports info atm pvc command

This command displays information
circuits (PVCs) for the specified port or for all ports. The command uses the
syntax:
show ports info atm pvc [< ports >]
Description
This field is read only. It takes remaining bits from
NumVpiBits. For example, if NumVpiBits is 3 for OC-3c,
then NumVciBits is 8.
Indicates whether the Clock Source is either:
• line
• internal
Indicates the loopback mode:
• off
• internal
• external
Indicates the Admin State of the port, either:
• up
• down
Indicates the status of the port, either:
• up
• down
(Figure 33) about the permanent virtual
Using the Passport 8672ATME Module
91