100
Chapter 5 Managing the Passport 8672ATME Module with the CLI
Table 30
fepathcurrent
Table 30 Information fields for the show ports stats atm fepathcurrent command
Field
PORT NUM
ERRORED SECONDS
COUNT (ES)
SEVERELY ERRORED
COUNT (SES)
CODE VIOLATION COUNT
(CV-P)
UNAVAILABLE SECONDS
(UAS)
show ports stats atm fepathinterval
This command displays statistics
interval. You specify the interval or span of intervals to display. The command
uses the syntax:
show ports stats atm fepathinterval < intervalid >
209195-B
describes the information fields for the show ports
command.
Description
Port number.
Errored Second (ES) is a second with one or more Coding
Violations (CV) or one or more incoming defects (for
example, SEF, LOS, AIS, LOP).
Severely Errored Second (SES) is a second with x or more
CVs, or one or more incoming defects.
Coding Violations (CV) are Bit Interleaved Parity (BIP)
errors that are detected in the incoming signal. CV
counters are incremented for each BIP error detected.
The number of seconds that the interface is unavailable.
(Figure 39)
on the far end path over a 15-minute
stats atm
< ports >
[
]