Chapter 4 Managing the Passport 8672ATME Module with Device Manager
Table 14
Table 14 F5 Loopback Stats tab fields
Field
VcStatus
LbRequestSent
LbReplyReceive
LbReplySent
Displaying statistics using Device Manager
Statistics are not supported in Device Manager in this release. See the
stats atmport command" on page 94
Testing using Device Manager
Testing is not supported in this release.
describes the fields in the F5 Loopback Stats tab.
Description
This field indicates the status of the PVC link.
•
notManaged—VC is not being managed by OAM
•
Down Verify—An OAM loopback failed. End-to-end F5-OAM
loopback cells are sent at the specified retry frequency to verify
that the VC is down. After down-count unsuccessful retries,
the VC goes to the down state (see LbDownCount in
•
Down—VC has not received responses to end-to-end F5-OAM
loopback cells.
•
Up Verify—An OAM loopback was successful. End-to-end
F5-OAM loopback cells are sent at the specified retry
frequency to verify the VC is really up. After up-count
successive and successful loopback retries, the VC goes to the
Up state (see LbUpCount in
•
Up—End-to-end loopbacks are successful.
Number of OAM loopback requests sent.
Number of OAM loopback replies sent.
Number of OAM loopback replies received.
Table
13).
for information on statistics in the CLI.
Using the Passport 8672ATME Module
73
Table
13).
"show ports