Creating Two Vlans "Byport; Assigning Ip Addresses; Figure 55 Ip Routing With Atm 1483 Pvcs - Nortel Passport 8672ATME Using Manual

130 Chapter 6 Configuring the Passport 8672ATME Module

Figure 55 IP routing with ATM 1483 PVCs

1.x
This configuration requires the following procedures:
• "Creating a VLAN "byPort" and adding ports" on page 121
• "Assigning IP addresses" on page 130
• "Enabling RIP routing" on page 132
• "Configuring a null-encapsulation PVC" on page 136
• "Associating the PVC with the VLAN" on page 136

Creating two VLANs "byPort"

To create two VLANs "byPort," see
ports" on page
VLAN can have one or multiple Ethernet ports.

Assigning IP addresses

To assign an IP address to both VLANs:
1 From the Device Manager menu bar, choose VLAN > VLANs.
The VLAN dialog box opens with the Basic tab displayed
page
Table 42 on page 122
2
Click one of the VLANs.
209195-B
Passport
ATM VC1
2.x
RFC 1483 Routed PVC
Note: Each configured ATM 1483 PVC uses one VLAN. The
Passport 8672ATME Module can be configured for a maximum of 256
VLANs per MDA and a maximum of 512 VLANs per card.
121. One VLAN must have only one ATM port. The second
121).
describes the fields in the VLAN Basic tab.
ATM Switches
ATM VC1
2.x
"Creating a VLAN "byPort" and adding
Traditional
Router
3.x
9938EB
(Figure 51 on