Verifying Installation; Figure 9 Tightening The Retainer Screws; Chapter 5 - Nortel Passport 8672ATME Using Manual

5
Tighten the retaining screws

Figure 9 Tightening the retainer screws

You must install at least one MDA on the Passport 8672ATME Module in order to
pass traffic. For instructions on installing MDAs, refer to Installing Media
Dependent Adapters for the Passport 8672ATME Module.
For information on configuring and managing the Passport 8672ATME Module,
refer to
Manager," on page
with the CLI," on page
Passport 8672ATME Module," on page

Verifying installation

The Passport 8672ATME Module front panel has an Online LED that indicates
whether or not the module has power applied and is initialized correctly. For
information on online LEDs, see
Chapter 3 Installing the Passport 8672ATME Module
Chapter 4, "Managing the Passport 8672ATME Module with Device
47, to Chapter 5, "Managing the Passport 8672ATME Module
75, and to
Note: You cannot configure the Passport 8672ATME Module until the
online LED on the module is steadily lit green and you have inserted at
least one MDA.
(Figure 9).
10038FA
Chapter 6, "Configuring the
117.
"Online LED" on page
Using the Passport 8672ATME Module
30.
41