Media Dependent Adapters; Figure 1 Passport 8672Atm Module; Figure 2 1-Port Oc-12C/Stm-4 Mda - Nortel Passport 8672ATME Using Manual

Figure 1 Passport 8672ATM module

To configure and manage the Passport 8672ATME Module, connect to the console
port of your switch fabric module (either the Passport 8690SF Module or the
Passport 8691SF Module). For information on connecting to the console port,
refer to the installation guide that came with your switch.

Media dependent adapters

The Passport 8672ATME Module has space for two media dependent adapters
MDAs) that have their own LEDs. You can use up to two of the following MDAs
with the Passport 8672ATME Module:
• 1-port OC-12c/STM-4: SMF or MMF
• 4-port OC-3c/STM-1: SMF or MMF
You can mix these MDAs on the Passport 8672ATME Module. Contact your
Nortel Networks representative for other MDAs that are available for this product.
Figure 2 shows the OC-12c/STM-4 MDA, and
MDA.

Figure 2 1-port OC-12c/STM-4 MDA

Chapter 1 About the Passport 8672ATME Module
9725EA
MDA 1 MDA 2
Figure 3 shows the OC-3c/STM-1
Using the Passport 8672ATME Module
29
8672 ATM
Online
9901EA