Chapter 6 Configuring the Passport 8672ATME Module
4
Click the RIP tab.
The RIP tab opens
Figure 58 RIP tab
Table 47
describes the RIP tab fields.
Table 47 RIP tab fields
Field
Enable
Supply
Listen
Poison
AdvertiseDefaultRoute
AcceptDefaultRoute
TriggeredUpdateEnable Indicates whether the RIP triggered update feature should be
(Figure
58).
Description
IP address of the VLAN.
Enables or disables RIP supply on the specified interface.
Enables or disables RIP reception on the specified interface.
Enables or disables operation of poison reverse on the
specified interface. If poison is disabled, split-horizon operation
is enabled.
Indicates whether this interface should advertise a RIP default
route.
Indicates whether this interface should accept a RIP default
route.
enabled on this interface.
Using the Passport 8672ATME Module
133