Factory Defaults; Table 57 Factory Default Settings For The Passport 8672Atme Module - Nortel Passport 8672ATME Using Manual

Appendix B

Factory defaults

Table 57
from the factory, as well as the management tool to change parameters.

Table 57 Factory default settings for the Passport 8672ATME Module

Parameter
VPI bits OC-3
VPI bits OC-12
VCI bits OC-3
VCI bits OC-12
Scrambling
Framing
Clock source
Loopback mode
Encapsulation
Bit rate
Traffic shaping
F5 OAM requests
F5 OAM responses
For more information on factory defaults, refer to:
•
•
shows the default settings on the Passport 8672ATME Module as it comes
Default
4
4
7
9
Enabled
SONET
Free-running
Internal
LLC-SNAP
UBR
Disabled
Disabled
Enabled
Configuring Switching and Routing Operations for the Passport 8000 Series
Switch Using the Command Line Interface Release 3.2
Configuring Switching and Routing Operations for the Passport 8000 Series
Switch Using Device Manager Release 5.x.x
Management tool
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
Using the Passport 8672ATME Module
155