Configuring And Managing Atm; Table 4 Device Manager Buttons - Nortel Passport 8672ATME Using Manual

Chapter 4 Managing the Passport 8672ATME Module with Device Manager
Additionally, many Device Manager windows and dialog boxes contain buttons.
Table 4

Table 4 Device Manager buttons

Field
Apply
Refresh
Close
Help
Insert
Resize Columns

Configuring and managing ATM

This section describes how to use Device Manager to configure and manage ATM,
and includes the following topics:
• "Changing default settings" on page 52
• "Resetting the module" on page 54
• "Viewing MDA information" on page 56
• "Enabling or disabling a port" on page 57
• "Editing port parameters" on page 58
• "Editing ATM and framing parameters" on page 58
• "Editing circuit parameters" on page 60
• "Deleting a PVC" on page 63
• "Configuring ATM 1483 ELAN parameters" on page 64
• "Configuring ATM 1483 ELAN parameters" on page 64
• "Deleting an ATM 1483 ELAN" on page 69
describes the function of these buttons.
Description
Applies the changes you entered to fields in a window or dialog box.
Refreshes the information in the window. Each time you click
Refresh, new information is polled form the switch and displays.
Closes the window or dialog box and disregards any changes you
made to fields.
Does not function with the Passport 8672ATME Module.
Inserts or creates a new group, such as traps.
Resizes column on the screen.
Note: You must always click Apply at the bottom of the tab to
implement any changes you make.
Using the Passport 8672ATME Module
51