Mda Insertion And Configuration - Nortel Passport 8672ATME Using Manual

44 Chapter 3 Installing the Passport 8672ATME Module
After the image loads onto the Passport 8672ATME Module, it performs a series
of self-diagnostic tests. If the module fails the diagnostics, the screen displays the
following message:
Fatal bring up error on ATM card in slot <number>.
If you see this message, contact a service representative. For information on
contacting service representatives, refer to
When the image successfully loads onto the Passport 8672ATME Module, the
screen displays the following message:
ATM card in slot <number> is online.
The switch fabric module (Passport 8690SF or Passport 8691SF) can download
the image to two Passport 8672ATME Modules in the same Passport 8600 series
chassis simultaneously.
If you have one MDA installed, you can proceed to configure the
Passport 8672ATME Module.

MDA insertion and configuration

Once you insert an MDA, you must complete some basic configuration tasks for
the Passport 8672ATME Module to begin switching operations as soon as it
completes initialization. For information on installing MDAs, refer to Installing
the Installing Media Dependent Adapters for the Passport 8672ATME Module.
209195-B
Note: If you accidentally delete the image file, reset the card and
redownload the file. For information on how to reset the card, see
"Resetting the module" on page
Note: You must save your configuration (using either the CLI or Device
Manager) to preserve the configuration changes you made to the
Passport 8672ATME Module across reboots.
"How to get help" on page
54.
24.