Installing The Passport 8672Atme Module; Safety And Environmental Precautions - Nortel Passport 8672ATME Using Manual

Chapter 3

Installing the Passport 8672ATME Module

This chapter describes the procedure for installing the Passport 8672ATME
Module. It covers the following topics:
•
•
•
•
•
•
For more information about the Passport 8600 chassis, refer to the following
documents:
•
•

Safety and environmental precautions

Before you begin performing any installation or replacement procedure on the
Passport switch, please note the following safe handling guidelines:
•
"Safety and environmental
"Installing the Passport 8672ATME Module" on page 39
"Verifying installation" on page 41
"Initialization" on page 42
"MDA insertion and configuration" on page 44
"Replacing a module" on page 45
Getting Started with Passport 8000 Series Management Software
Installing the Passport 8600 Modules
To prevent damage caused by electrostatic discharge (ESD), handle the switch
chassis and modules only when you, the chassis, and the chassis modules are
properly grounded. Nortel Networks recommends the use of a grounding
wrist strap.
precautions," next
Using the Passport 8672ATME Module
37