Chapter 4 Managing the Passport 8672ATME Module with Device Manager
Figure 15 MDA dialog box
Table 7
describes the MDA dialog box fields.
Table 7 MDA dialog box fields
Field
Type
Description
Enabling or disabling a port
You can enable or disable a port by two methods. To enable or disable a port
through the Device Manager menu bar:
1
On the device view, highlight a port.
2
From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed
3
In the AdminStatus area, click up to enable the port, or click down to disable
the port.
Description
Media type:
•
rc<XXXX>Oc3BaseSM.
•
rc<XXXX>Oc3BaseMM.
•
rc<XXXX>Oc12BaseSM.
•
rc<XXXX>Oc12BaseMM.
MDA type:
•
Quad OC-3c SM — quad port OC-3c single-mode fiber.
•
Quad OC-3c MM — quad port OC-3c multimode fiber.
•
OC-12c SM — single port OC-12c single-mode fiber.
•
OC-12c MM — single port OC-12c multimode fiber.
(Figure
Using the Passport 8672ATME Module
57
12).