Key Expansion Module Configuration; Key Expansion Module Display - Nortel NN10300-011 User Manual

ATTENTION
When connected to a Centrex IP Client Manager, KEM has only 22 keys
available. The top key in each column is not used.

Key Expansion Module configuration

Nortel IP Phone Key Expansion Module (KEM) does not have an option
menu of its own. When a KEM is installed on an IP Phone, the IP Phone
controls the keys of the KEM just as it does its native keys.
You can use the IP Phone option menu to configure these KEM options:
•
•
•
•
The only KEM-specific option available from the Centrex IP Client Manager
terminal setting menu is Display. Use this option to adjust the brightness of
the display.

Key Expansion Module display

Nortel IP Phone Key Expansion Module (KEM) has one liquid crystal
display (LCD) screen, as shown in
(page
Figure 2
IP Phone 2002 with KEM
Each of the physical keys on the KEM can have a user-defined label (with
a maximum of 10 characters) associated with it. Labels for KEM keys are
created using the controls on the IP Phone. KEM keys are numbered
sequentially, beginning with the first number after the last defined key on
the IP phone. See the IP Phone User Guides for the procedure to create a
label for a KEM key.
Copyright © 2008 Nortel Networks
.
language
screen contrast level
display diagnostics
feature key label
9).
Carrier VoIP
Nortel IP Phone Expansion Module User Guide (CICM)
NN10300-011 09.01 Standard
Key Expansion Module (KEM) 9
Figure 2 "IP Phone 2002 with KEM"
4 July 2008