Maintenance Schedule; Reminder Of Use; Engine - SDMO RENTAL POWER R550C2 User And Maintenance Manual

7. Maintenance schedule

7.1. Reminder of use

The maintenance interval frequency and the operations to be carried out are outlined in the maintenance schedule, given as a guideline.
N.B. the environment in which the generating set is operating determines this schedule.
If the generating set is used in extreme conditions, shorter intervals between maintenance procedures should be observed
These maintenance intervals only apply to generating sets running on fuel, oil and coolant which conform to the specifications given in
this manual.

7.2. Engine

R = Replace
I = Inspection (includes, if necessary, cleaning, adjustment, lubrication and charge)
First service inspection
After the first 100 – 200 hours
Fuel pre-filter, draining water / contamination
Coolant level
Drive belts
Start and warm up engine
Coolant / oil / fuel, leakage
Inspection with VODIA (diagnostic tool)
Engine and transmission, abnormal noises
Stop engine
Engine oil and oil filters / by-pass filter
Restart engine
Oil pressuer / oil leakage
Every 50 – 600 hours
Engine oil and oil filters / by-pass filter
After the first 1 000 hours
Valve clearance
Every 500 hours
Fuel tank (sludge trap), drain
Inspection with VODIA (diagnostic tool)
Fuel pre-filter, draining condensed water
Air filter inserts (indicator), engine
Radiator
Drive belts
Batteries, electrolyte level
Every 1 000 hours
Fuel filter
Air filter insert
Fuel pre-filter
Coolant filter (if fitted). Not at same time as coolant change.
Every 2 000 hours
Valve clearance
Every 2 000 hours
Turbo
Turbo, Wastegate
Engine, with respect to leakage
Engine hoses, cables and clamps
Engine, cleaning and painting
Air filter, tank breather
Air filter compressor
117/298
I
I
I
I
I
I
R
I
At least every
(month)
12 24 48
R 
I
At least every
(month)
12 24 48
I 
I 
I 
I 
I 

I
I 
At least every
(month)
12 24 48
R 
R 
R 
R 
I
At least every
(month)
12 24 48
I 
I 
I 
I 
I 
R 
R 