Main Menu; Engine Data - SDMO RENTAL POWER R550C2 User And Maintenance Manual

Instruments and Controls
12
Menus
There are several sub-menus under each main menu.
There is not space for all the menu choices on the dis-
play. To scroll through the menus, use the 7 and 9 but-
tons on the display. Press the SEL button 8 to make a
selection. Refer to the illustration on the previous page.
NOTICE! The Setup menu can be used to select the
language that you want to use on the display.

Main menu

• Engine data, current engine data
• Preheat, manual activation of pre-heating. Must be
activated with temperatures below 0°C (32°F)
• Governor mode. activation of droop
Diagnostics, shows fault codes as text
•
• Trip reset, resets trip data
• Setup, parameter setting
• Information, shows the currently applicable hard/
software, data sets and engine identification for the
engine and DCU data

Engine data

shows relevant engine data.
• Engine speed, can be controlled with the SPEED+
and SPEED– buttons (rpm)
• Charge pressure (kPa)
• Coolant temperature (°C)
• Charge air temperature (°C)
• Oil pressure (kPa)
• Oil temperature (°C)
• Engine hours (h)
Battery voltage (V)
•
• Fuel consumption (l/h)
• Instantaneous fuel consumption (trip fuel) (l)
140/298
7748681 12-2011