Advanced Settings - AMX NMX-ENC-N3121 Instruction Manual

Advanced Settings

The section of the Settings page shown in
in Table 18.
Advanced Settings
FIG. 44
Settings Page: Advanced Settings
TABLE 18
Option
Add latency (ms)
Input audio for
LocalPlay
YCbCr 4:2:2 Output
Simplif ied DVI/HDMI
Detect
Last Frame Hold
DVI/HDMI off on stream
loss
DVI/HDMI Enable
N3000 Series User Manual
Figure 44 is displayed when you click the Advanced Settings link. Options are described
Description
Enter number of milliseconds to add to latency.
Select to enable the input audio when the Live/Local
menu is set to one of the local images.
Set YCbCr output to be disabled, enabled, or selected
automatically based on the connected display.
Select to enable the detection of a display device using
a simple line level check.
Select to cause the Decoder to continue playing the last
valid video frame if the network connection is lost.
Select to disable the video output drive when the video
stream is not available.
Select to enable output video.
Decoder Configuration Options
Notes
Increase this number if you are having video or audio
drop issues. A higher latency increases the tolerance
to jitter in the stream timing.
In order to get input audio for LocalPlay:
On the Encoder's Settings page, enable PCM

audio.
On the Decoder's Settings page, disable Audio

Follows Video and set the Audio Stream to the
Encoder (or audio source).
When enabled, Local Play will not appear.
52