Record Page - AMX NMX-ENC-N3121 Instruction Manual

Record Page

Click the Record link at the top of any of the main web pages to access the page shown in
recording options on the Encoder and to customize when/if the unit transfers the recorded files to another location. See
for option descriptions. This page is only applicable to the N3132 Encoder.
Record Page
FIG. 36
Record Page Options
TABLE 14
Option
Command buttons
Start Record button
Stop Record/Transfer
File button
Format USB
Status section (read-only)
USB State
Free Space
N3000 Series User Manual
Description
Click to begin recording to the USB device plugged into the front of the N3132 Encoder.
Click to stop a recording and start the file transfer.
Click to format the USB device plugged into the front of the N3132 Encoder.
Displays the state of the current USB connection. When the unit is properly configured and the USB device is
validated, Device Ready is displayed. See the USB Port setting below for more information.
Indicates file space left on the USB device.
Encoder Configuration Options
Figure 36. This page allows you to set up
Table 14
43