AMX NMX-ENC-N3121 Instruction Manual page 70

FIG. 63 Restricted Content Not Supported Screen
Displayed when Decoder....
• is receiving a stream from an
Encoder
• is connected to a monitor that does
NOT support Restricted Content
(i.e., the monitor is NOT HDCP
compliant)
NOTE: The Encoder must f irst be set up to pass HDCP-protected content.
FIG. 64 Video Source Outputting Restricted Content Screen
Displayed when Decoder....
• is receiving a stream from an
Encoder
N3000 Series User Manual
...and Encoder....
• is transmitting HDCP-protected
content to the Decoder
...and Encoder....
• is receiving HDCP-protected
content from the video source, but
is not set up to pass it.
Notes
Once the Decoder detects that the monitor is not
HDCP compliant, this screen is displayed. If you
suspect that this message was displayed in error,
please call Technical Support.
Notes
Please call SVSI Technical Support to enable this
feature.
Troubleshooting
70