Decoder Setup Section - AMX NMX-ENC-N3121 Instruction Manual

Decoder Setup Section

The Decoder Setup section of the Settings page is shown in
Decoder Setup Section
FIG. 42
Settings Page: Decoder Setup Section
TABLE 16
Option
Device Name
Stream
Unicast Mode
Audio Stream
Audio Follows Video
Scaler
N3000 Series User Manual
Description
Enter a user-friendly name for the unit.
View/edit the current transmit stream number.
Enable to prevent the Decoder from joining a multicast
stream.
View/edit the current audio receive stream number. This
allows the N3000 to play audio streams from other AMX
devices such as the N4321.
Enable to force the Audio Stream to the same as the
video stream.
Enable to scale outgoing content to a fixed resolution.
Figure 42. Options are described in
Notes
More descriptive names in this field help you organize
and manage the SVSI system efficiently. Names
based on the unit's location and function are very
useful. Some good examples are Lobby-Left-VGA (for
left side of lobby, VGA input) or CR201-HDMI (for
Conference Room 201, HDMI input). Keep in mind the
matrices are organized alphanumerically.
To better understand this setting, think of Decoders
dialing up channels on a cable box, rather than a
traditional AV matrix. Each Decoder can dial in a
different active channel.
If enabled, the Encoder must direct the stream to the
Decoder using unicast (or the stream may be
specified by its URL).
When the audio source is an N3000 Encoder, the
Encoder must have PCM audio enabled. See the
Encoder's PCM Audio section on page 17 for more
details.
Decoder Configuration Options
Table 16.
49