Time Settings
The section of the Settings page shown in
Network Time Protocol (NTP) servers and the time zone. This information is used to provide accurate stream time stamping.
Time Settings Section
FIG. 24
RS232 Settings
The section of the Settings page shown in
Table
5.
RS232 Settings
FIG. 25
Settings Page: RS232 Settings
TABLE 5
Option
RS232 Baud Rate
RS232 Data Bits
RS232 Parity
RS232 Stop Bits
N3000 Series User Manual
Figure 24
is displayed when you click the Time Settings link. Use this section to specify
Figure 25
is displayed when you click the RS232 Settings link. Options are described in
Description
Select the appropriate baud rate for the RS232 serial interface. Default is 9600.
Select the appropriate data bit count for the RS232 serial interface. Default is 8.
Select the appropriate parity for the RS232 serial interface. Default is no parity (none).
Select the appropriate number of stop bits for the RS232 serial interface. Default is 1.
Encoder Configuration Options
32