Stream Settings - AMX NMX-ENC-N3121 Instruction Manual

Stream Settings

The section of the Settings page shown in
Table 17.
Stream Settings Section
FIG. 43
TABLE 17
Option
Stream Source
Stream URL
Support B-Frames
Multicast Address
Override
Multicast Address
UDP Port Number
N3000 Series User Manual
Settings Page: Stream Settings Section
Description
Choose the source type from which the Decoder will
receive the AV stream (URL or SVSI encoder).
If URL is selected for the Stream Source (see above)
enter the URL from which the Decoder will receive the
AV stream.
Enable if the stream has B frames to avoid jittery video. Enabling this setting adds 100 ms of latency.
Enable to override the upper two octets of the
multicast address with the values specified in the
Multicast Address field (see below).
If Multicast Address Override is enabled, enter the
upper two octets.
Specifies the UDP port number for the AV stream.
Figure 43 is displayed when you click the Stream Settings link. Options are described in
Decoder Configuration Options
Supported formats include:
rtp://
udp://
rtsp://
http://
Must match the upper two octets of the Encoder's
multicast address.
Must match the upper two octets of the Encoder's
multicast address.
Must match the Encoder's UDP port number.
51