N-Act Page - AMX NMX-ENC-N3121 Instruction Manual

N-Act Page

Click the N-Act link at the top of any of the main web pages to access the page shown in
command lists which are performed automatically by the unit based on power or video connection (without the use of an outside
controller). For example, you can tell a projector and lights to come on when the Decoder powers up. You can add multiple
commands for each event. See
N-Act Page
FIG. 53
N-Act Page Options
TABLE 26
Option
Enable N-Act Events
Power on Event
Video Cable Connected
Event
Video Cable
Disconnected Event
Save Events
Import/Export
N3000 Series User Manual
Table 26 for option descriptions.
Description
Enable to activate the configured events.
Create/delete/test events to be performed when the Decoder powers on. Visit our website for more details on
Application Programming Interface (API) commands.
Create/delete/test events to be performed when the Decoder is connected to an output display. The Trigger
Delay field specifies how long (in milliseconds) the device has to be connected for the command to be executed.
Create/delete/test events to be performed when the Decoder is disconnected from the output display. The
Trigger Delay field specifies how long (in milliseconds) the device has to be disconnected for the command to
be executed. This keeps accidental (momentary) disconnects from triggering the command sequence.
Click to save changes made to this page.
Use this section of the page to import/export N-Act event configurations so you can share them from one unit
to another.
Decoder Configuration Options
Figure 53. This page allows you to create
60