AMX NMX-ENC-N3121 Instruction Manual page 50

Settings Page: Decoder Setup Section (Cont.)
TABLE 16
Option
Output Mode
Live/Local
Mute
Lineout Volume
Enable HDMI Audio
Stream Settings
Advanced Settings
Time Settings
RS232 Settings
Allow SVSI Multicast
Disable P1
Cancel
Save
N3000 Series User Manual
Description
Select the output resolution of the video to be
transmitted to the video output device (e.g., LCD). The
Scaler check box must be enabled for this to be
applicable (see Scaler above).
Select live video or locally stored images for
transmission to the video output device (e.g., LCD).
When video is not available, it automatically goes into
local mode.
Enable to mute output audio.
This slider controls the output gain on the analog audio
output. By default, it controls both the left and right
lineout channels. Click the Set Left/Right link to control
channels individually.
Set HDMI audio to be disabled, enabled, or selected
automatically based on the source.
Refer to Stream Settings on page 51 for details on the
options available from this link.
Refer to Advanced Settings on page 52 for details on
the options available from this link.
Refer to Time Settings on page 54 for details on the
options available from this link.
Refer to RS232 Settings on page 54 for details on the
options available from this link.
Disable this option to prevent the port from outputting
multicast video traffic.
Completely disables the P1 port for all traffic.
Click to return all controls to the last saved
configuration.
Click to accept changes made to these controls.
Decoder Configuration Options
Notes
When video is not available, the most recently played
local playlist is displayed.
ON forces audio on at all times. AUTO reads the EDID
of the connected device to determine whether or not
to send audio.
Particularly useful if you are connecting a non-SVSI
device to a port for network-based control.
Once disabled, anything connected to the P1 port will
no longer be available on the network.
50