A/V Setup Page - AMX MAX-CSD ENCODER Instruction Manual

Encoder Profiles and Parameters (Cont.)
Profiles:
Good Quality
Standard Quality
VCR
Security Camera
Custom
When the a lower quality Encoder Profile is used (Good Quality or lower), the Stream
parameters default to using RTP as a Transport Protocol.

A/V Setup Page

To access this page, click the A/V Setup link from within the Navigation frame. This page
(FIG. 17) allows a user (with sufficient access rights) to configure the properties associated with
both the incoming video and audio content.
FIG. 17 A/V (Audio/Video) Setup page
MAX Video Encoder
Stream Quality: Video Defaults:
Medium • Codec: MPEG-4
• Video In Rate: 3Mbps
• Resolution: D1
• Mode (encoding): CBR
Low • Codec: MPEG-4
• Video In Rate: 2Mbps
• Resolution: D1
• Mode (encoding): CBR
Lower • Codec: MPEG-4
• Video In Rate: 1Mbps
• Resolution: SIF
• Mode (encoding): VBR
Min • Codec: MPEG-4
• Video In Rate: 500 Kbps
• Resolution: SIF
• Mode (encoding): VBR
User Dependant • User Selectable:
UDP = MPEG-2 only
RTP = MPEG-2/4
MAX-CSE Web Interface
Audio Defaults: Protocol
• Codec: MP2 • RTP
• Sampling Rate: 48 KHz
• Effective Rate: 192 Kbps
• Codec: MP2 • RTP
• Sampling Rate: 48 KHz
• Effective Rate: 192 Kbps
• Codec: MP3 • RTP
• Sampling Rate: 32 KHz
• Effective Rate: 96 Kbps
• Codec: MP3 • RTP
• Sampling Rate: 32 KHz
• Effective Rate: 96 Kbps
• User Selectable • UDP/RTP
Video Port and Video Format
Mic Gain value for incoming
audio signal
29