Table of Contents
Advertisement
Decoder Setup Section
The Decoder Setup section of the Settings page is shown in
Decoder Setup Section
FIG. 3
Settings Page: Decoder Setup Section
TABLE 1
Option
Device Name
Stream
Audio Stream
Audio Follows Video
Scaler
Output Mode
Live/Local
Mute
N2000 Series User Manual
Description
Enter a user-friendly name for the unit.
View/edit the current transmit stream number.
View/edit the current audio receive stream number.
Enable to force the Audio Stream to the same as the
video stream.
Enable to scale outgoing content to a fixed resolution or
to use the Crop/Pan/Zoom functions.
Select the output resolution of the video to be
transmitted to the video output device (e.g., LCD) (the
Scaler check box must be enabled for this to be
applicable).
Select live video or locally stored images for
transmission to the video output device (e.g., LCD).
When video is not available, it automatically goes into
local mode.
Enable to mute output audio.
Figure
3. Options are described in
Notes
More descriptive names in this field help you organize
and manage the SVSI system efficiently. Names
based on the unit's location and function are very
useful. Some good examples are Lobby-Left-VGA (for
left side of lobby, VGA input) or CR201-HDMI (for
Conference Room 201, HDMI input). Keep in mind the
matrices are organized alphanumerically.
To better understand this setting, think of Decoders
dialing up channels on a cable box, rather than a
traditional AV matrix. Each decoder can dial in a
different active channel.
When video is not available, the most recently played
local playlist is displayed.
Decoder Configuration Options
Table
1.
48
Advertisement
Table of Contents
