Tcp/Ip Settings; Network Settings - Dell C1660w Color Laser Print User Manual

TCP/IP Settings

Purpose:
To configure TCP/IP settings.
Values:
IP Address Mode AutoIP
DHCP
BOOTP
RARP
Manually Set
IP Address
Subnet Mask
Gateway Address
Apply New Settings
Restart printer to apply new settings

Network Settings

Purpose:
To display the server settings of the Dell Printer Configuration Web Tool.
NOTE:
When the printer is connected to the USB port, this setting cannot be displayed.
Values:
Print Server Display
Settings
Display of Dell Off
Configuration Web
Tool
On
Apply New Settings
Restart printer to apply new settings
120
Understanding the Tool Box Menus
Automatically sets the IP address.
Uses DHCP to set the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Manually sets the IP address.
Manually sets the IP address allocated to the printer.
Manually sets the subnet mask.
Manually sets the gateway address.
After you complete the settings, click Apply New Settings to apply the changes.
Click Restart printer to apply new settings to apply the changes.
Click to display the server settings for the Dell Printer Configuration Web Tool.
Turns off the display of the server settings for the Dell Printer Configuration Web
Tool.
Turns on the display of the server settings for the Dell Printer Configuration Web
Tool.
After you complete the settings, click Apply New Settings to apply the changes.
Click Restart printer to apply new settings to apply the changes.