Cleaning The Spectrophotometer Unit (Option) Parts - Canon imagePROGRAF iPF6400S User Manual

iPF6400S
4
Fold a sheet of Plain Paper two or three times (a) and in-
sert it under the Paper Retainer (b) from behind the print-
er to wipe the entire surface of the Paper Retainer clean.
5
Attach the Roll Feed Unit. (See "Installing the Roll Feed Unit.")
6
Plug the power cord into the outlet.

Cleaning the Spectrophotometer Unit (option) Parts

Cleaning the Spectrophotometer Unit (option) Parts
Clean the Spectrophotometer Unit parts as follows.
Cleaning the White Calibration Tile
1
Turn the printer off.
(See "Turning the Printer On and Off.")
2
Unplug the power cord from the outlet.
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the print-
er on poses a risk of injury if you touch moving parts inside the printer.
Caution
3
Open the Spectrophotometer Unit Cover.
4
Press down on the center (near the blue label) of the
Up-down Unit to lower the Up-down Unit.
User's Guide
P.530
➔
P.21
➔
Cleaning the Spectrophotometer Unit (option) Parts
911