Combine Original Sets (Adding Originals) - Fuji Xerox ApeosPort-V 4020 User Manual

Combine Original Sets (Adding Originals)

Use this feature when you copy a document that has too many pages to be loaded into the
document feeder at one time, or when you scan each document page using the document
glass and have the machine process the pages as one job.
When you use this feature, [Next Original] is always selected on the screen during scanning
documents with the document feeder or the document glass.
The output is automatically sorted.
When all documents have been scanned, select [Last Original].
Note
1
Select [Combine Original Sets].
2
Select [On].
 Off
Disables this feature.
 On
Enables this feature.
 Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note
 Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
Sideways Images

Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
[Copy] Screen When Combine Original Sets is in Progress
The [Copy] screen is displayed when copying
starts.
 Delete
Clears the document data stored with the
Combine Original Sets feature, and cancels
copying.
• After a sample set is output, if the machine is left uninstructed for the period specified in [Auto
Clear], you can set whether or not to start the data remained. For more information, refer to "5
Tools" > "Common Service Settings" >"Other Settings" > "Paused Job Handling".
For more information on [Auto Clear], refer to "5 Tools" > "Common Service Settings" > "Machine
Clock/Timers" > "Auto Job Release" in the Administrator Guide.
• If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
Job Assembly
3
137