Fuji Xerox ApeosPort-V 4020 User Manual page 212

4 Fax
F Code Method
You can perform Relay Broadcast by registering the relay station's F code and password (if
necessary) to the machine.
Note
1
Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options] screen.
2
Select [F Code].
4
3
Select [On].
4
Select the [F Code] box, and enter the F code with the numeric keypad.
Note
Relay Broadcast
 Relay Broadcast
The number of digits of the relay station ID:
1: When the relay station IDs and address numbers are two digits
2: When the relay station IDs and address numbers are three digits
 Print Directive
Printing/not printing at the relay station
1: Printing at the relay station
0: Not printing at the relay station
212
• When performing Relay Broadcast with the F Code method, you can use a password if you set a
receive password for the relay station.
• When performing Relay Broadcast between Fuji Xerox manufactured machines that can be used as
both an initiating station and a relay station, we recommend that you use the fax signal method.
• Confirm the F code (sub-address) and password of the target relay station.
• You can enter up to 20 digits for the F Code.
Print Relay
Directive Station ID
Up to 20 digits
Address Address Address
Number Number Number
....