Combine Original Sets (Adding Originals) - Fuji Xerox Color C60 User Manual

3 Copy
the number of the sample set that has already been printed. When reducing the quantity,
specify a value between 1 (sample set) and the number of copies entered before.
Note
Change Settings
Displays the [Change Settings] screen. To cancel the settings you have made, deselect the
check box for the feature you want to cancel.
Delete
The remaining copies are canceled.
Start
The remaining copies are made.
Note

Combine Original Sets (Adding Originals)

3
Use this feature when you copy a document that has too many pages to be loaded in the
document feeder at one time, or when you scan each document page using the document
glass and have the machine process the pages as one job.
When you use this feature, [Next Original] is always selected on the screen during scanning
documents with the document feeder or the document glass.
If [Copy Output] is set to [Auto], the output is automatically sorted.
When all documents have been scanned, select [Last Original].
Note
1
Select [Combine Original Sets].
2
Select any option.
Off
Disables this feature.
On
Enables this feature.
162
• If you specify "1" as a new quantity and then press the <Start> button, the machine will not process
the job.
• You can also press the <Start> button on the control panel to perform the same operation.
• After the first original set is copied, the machine automatically outputs the data remained if the
machine is left unused for the period specified in [Auto Clear]. For more information on [Auto Clear],
refer to "5 Tools" > "Common Service Settings" > "Machine Clock/Timers" > "Auto Clear" in the
Administrator Guide.